Quick Answer: Should You Drywall The Ceiling Or Walls First?

Can you attach drywall to ceiling joists?

Yes you can, but it is not always easy to do.

The joists may not be perfectly spaced and you only have a 1-1/2 inch target for attaching two edges of the drywall.

As well, the floor joists are often not perfectly on the same plane, with one or more of the floor joists being slightly lower or higher than the others..

What should you do first drywall or flooring?

After the drywall is on, taped and painted, it’s time to install the finish flooring. Carpet, vinyl, tile or hardwood installs on top of the subfloor for a finished look. The finish flooring can add 3/8 to 3/4 inch to the height of the floor.

Can you drywall ceiling after walls?

yes you can rock the ceiling after the walls.

Should drywall touch the floor?

Always leave a 1/2-inch gap at the floor. This allows for floor and wall expansion without cracking the drywall. It also helps prevents moisture wicking if the floor floods.

How many screws go into a 4×8 sheet of drywall?

Figure on using about 32 drywall screws per sheet of 4-foot by 8-foot drywall installed horizontally on a wall. This total is comprised of four screws on the five middle studs and six screws on each of the two sides.

Does drywall have to end on stud?

Drywall Corners with No Stud Ideally, you want to have at least 1 inch of surface to attach the drywall sheet to. … If you are working with wood, a 2×4 nailed to the side of the existing stud should work. Be sure to inspect the corners of the room before beginning the drywall installation.

Can you use 1/2 inch drywall ceiling?

Building codes do, have some requirements when it comes to the thickness of drywall panels. … 1/2-inch: Half-inch drywall panels are the standard thickness for interior walls, as well as ceilings. 5/8-inch: These panels are commonly used for ceilings, or for walls that require a prescribed fire-resistant rating.

Should drywall be installed vertically or horizontally?

On commercial jobs, fire codes often require seams to fall on the entire length of the framing, so the drywall must be hung vertically. However, on residential jobs, the drywall on the walls is typically hung horizontally. For walls nine feet high or shorter, hanging the drywall horizontally has a number of benefits.

How much is it to drywall a ceiling?

The cost to drywall a ceiling ranges from $2.25 to $3 per square foot. This is because ceilings are more difficult to hang and finish. Part of the higher cost for ceilings includes lightweight drywall.

Why do you hang drywall on the ceiling before the walls?

The primary reason that you want to start with the ceiling pieces first in installing drywall is for additional support. When you attach the ceiling sheets first, you can reinforce them with the wall pieces which will serve as a source of stability.

How much gap should be between sheets of drywall?

However, during installation, be religious about keeping that 1/8-inch space between sheets by using a guide. The blade of a drywall square is about 1/8-inch thick and does the trick.

How do you fill a gap between drywall and ceiling?

All it takes is a quick patching job with fiberglass mesh tape. You can then proceed with normal joint taping techniques, using drywall joint compound, which drywall professionals refer to as mud. In the end you’ll create a seamless looking joint between wall and ceiling that conceals the gap completely.

Do you stagger ceiling drywall?

It’s not necessary to stagger seams on ceiling drywall. However, because these joints are relatively difficult to finish—and tend to be noticeable in the finished product—it’s a good idea to stagger the drywall panels to make the joints less visible.

What is better sheetrock or drywall?

Whether you call it drywall, sheetrock, wallboard, plasterboard, or gypsum board they all are really the same thing – construction materials used to make interior walls and ceilings. … Sheetrock is a safer buy than a non-brand name drywall because sheetrock does not emit sulfur gas.

Why do you hang drywall from the top down?

When hanging drywall, always hang the ceiling first. This is the hardest drywall to hang, so get a partner and go slow. Large cracks due to misaligned sheets are hard to repair because the extra mud required to fill them will constantly fall out and drop to the floor (or worse, down the back of your neck!).

What thickness drywall is used for ceilings?

The thicker ⅝” drywall is the standard for ceilings. You don’t want to use ½” or ⅜” for ceilings, as over time it will sag downwards in between rafters. Also, ⅝” is the standard thickness for fire-resistant or fire-code drywall, commonly found in garages.

Which way do you hang drywall on ceiling?

Most often I choose to hang the drywall on ceilings perpendicular to the joists. Yes, we are always trying to avoid butted seams, but an occasional butt seam is better than a ridged seam running the length of the ceiling, or sagged drywall between joists.

Where do you start when Drywalling a room?

While amateurs often install drywall panels vertically, so that the long seams align along a stud, this is not the usual professional method. Instead, begin in one upper corner of the room and install panels horizontally with the top edge against the ceiling. Pros typically install the top row of panels first.